Shapers

Soli Bailey, a former Volcom Pipe Pro winner and an active WSL competitor, surf's with speed and power and is a legitimate charger! Soli's fins are positioned in the Carve Fin Class, a progressive design that loves to be surfed hard and fast. Soli’s fins feature a unique bevelled leading edge for smooth, controlled surfing that will easily adapt to a vast range of modern surfboard designs.

Available in a hand foiled PROGLASS construction for those wanting to take their surfing to the next level.

Compatible with Futures Fin Systems

Specifications

Medium: 60-75kgs

Large: 75-95kgs

Side Base: 115mm | 4.52"
Side Depth: 119mm | 4.68"
Side Sweep: 36°
Side Foil: Flat

Rear Base: 115mm | 4.52"
Rear Depth: 119mm | 4.68"
Rear Sweep: 36°
Rear Foil: 50/50

Designed in collaboration with one of the worlds best surfers. Banting’s Fins deliver speed, drive, power and control and are of the Carve Fin Class. Drawing Similarities to the likes of the Shapers AM Series, however offering more hold – these fins thrive on performance rail surfing and are well suited to boards with mid to extreme rocker.

Matt loves the Carbon Stealth for its dynamic, responsive flex pattern, an ultra-light, highly technical construction that loads up on energy (elastic potential energy) and then springs back to its neutral state, delivering acceleration, drive and overall speed (kinetic energy). Matt Bantings fins will perform particularly well on fast, flowing waves such as at point breaks.

Compatible with Futures Fin Systems

Specifications

Medium: 60-75kgs

Large: 75-95kgs

Side Base: 118mm | 4.64″
Side Depth: 120mm | 4.72″
Side Sweep: 36.3°
Side Foil: Flat
Area: 10,316.11mm² | 15.99″²

The Performance II Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. It boasts a 33mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Features:

Three Piece
Width: 305mm
Height: 300mm
33mm Power Kick
8 x 130mm Tapered Pro Arch
Diamond X Groove
Close Cell Water Resistant EVA

The Performance l Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. It boasts a 28mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Features:

Colour: Black
Three Piece
Width: 313mm
Height: 305mm
28mm Power Kick
7 x 130mm Pro Arch
Grid Lock+ Groove
Close Cell Water Resistant EVA

Shapers Performance Groveller Hybrid Tailpads are designed for wider tail Shortboards Longboards and Funboards. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Features:

Three Piece
Width: 330mm
Height: 330mm
33mm Pro Kick
7 x 130mm Pro Arch
Grid Lock Groove
Close Cell Water Resistant EVA

Product Features:

Two Piece
Width: 310mm
Height: 300mm
28mm Power Kick
7mm x 130mm Pro Arch
Grid Lock Groove
Close Cell Water Resistant EVA
Reduced Petrochemical Resin Consumption
Bio Base Materials
Proudly made with Bio-Recycled Foam

AM Fins are legendary! Developed by Al Merrick, Shaun Tomson and Tom Curren on the long walls of Rincon, AM’s have stood the test of time and remain arguably the most popular fin templates in the world. All of Shapers team riders have AM’s in their fin quiver for the simple fact that they perform at the highest level. AM’s are famous for exceptional speed, drive and release off the top.

The raked side fins deliver drive and draw out rail carves whilst the smaller centre fin reduces drag and frees up the tail. The AM’s are placed in the Carve Fin Class however fall into the all time, must have category! CARBON STEALTH construction offers a more lively flex pattern that holds longer through turns, loading up on energy and then reacting with extra speed, drive and flow.

Compatible with Futures Fin Systems

Specifications
Medium: 60-75kgs

Side Base: 115mm | 4.50″
Side Depth: 114mm | 4.52″
Side Sweep: 36.6°
Side Foil: Flat
Area: 9,670.95mm² | 14.99″²

The Sheldon Simkus Pro Model Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. The Sheldon Simkus Pro Model boasts a 28mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Features:

Colour: White
Three Piece
Width: 300mm
Height: 305mm
28mm Power Kick
7 x 130mm Pro Arch
Diamond Trax Groove
Close Cell Water Resistant EVA

The Sheldon Simkus Pro Model Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. The Sheldon Simkus Pro Model boasts a 28mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Features:

Colour: Black 
Three Piece
Width: 300mm
Height: 305mm
28mm Power Kick
7 x 130mm Pro Arch
Diamond Trax Groove
Close Cell Water Resistant EVA

The Matt Banting Pro Model Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. The Matt Banting Pro Model boasts a huge 33mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Features:

Three Piece
Width: 305mm
Height: 325mm
33mm Power Kick
8 x 130mm Tapered Pro Arch
Grid Lock+ Groove
Close Cell Water Resistant EVA

The Matt Banting Pro Model Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. The Matt Banting Pro Model boasts a huge 33mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Features:

Three Piece
Width: 305mm
Height: 325mm
33mm Power Kick
8 x 130mm Tapered Pro Arch
Grid Lock+ Groove
Close Cell Water Resistant EVA

AM Fins are legendary! Developed by Al Merrick, Shaun Tomson and Tom Curren on the long walls of Rincon, AM’s have stood the test of time and remain arguably the most popular fin templates in the world. All of Shapers team riders have AM’s in their fin quiver for the simple fact that they perform at the highest level. AM’s are famous for exceptional speed, drive and release off the top.

The raked side fins deliver drive and draw out rail carves whilst the smaller centre fin reduces drag and frees up the tail. The AM’s are placed in the Carve Fin Class however fall into the all time, must have category! CORELITE is Shapers traditional light-weight construction that provides a balanced flex pattern that responds to all levels of surfing.

Compatible with Futures Fin Systems

AM Fins are legendary! Developed by Al Merrick, Shaun Tomson and Tom Curren on the long walls of Rincon, AM’s have stood the test of time and remain arguably the most popular fin templates in the world. All of Shapers team riders have AM’s in their fin quiver for the simple fact that they perform at the highest level. AM’s are famous for exceptional speed, drive and release off the top.

The raked side fins deliver drive and draw out rail carves whilst the smaller centre fin reduces drag and frees up the tail. The AM’s are placed in the Carve Fin Class however fall into the all time, must have category! CORELITE is Shapers traditional light-weight construction that provides a balanced flex pattern that responds to all levels of surfing.

Compatible with Futures Fin Systems