FCS II Mark Richards Neo Glass Eco Twin + Stabiliser

FCS

FCS II Mark Richards Neo Glass Eco Twin + Stabiliser

R 1,750.00

Shipping calculated at checkout.

MR's twin + stabiliser template, now in new Neo Glass Eco. Exceptional pivot off the top, while the centre fin adds control.

Product Details:

About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials

Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions
Setup: Mark Richard's famous twin template produces exceptional drive and speed. The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up
Ideal Conditions: Constructed with 50% glass and bio-resin, MR's Neo Glass Eco Twin +1 has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. MR's template in Neo Glass Eco exceptional pivot off the top, while the centre fin adds control and is suitable for all conditions
Board Types: Designed to fit the FCS II Fin System. Recommended for all board types including fish, funboard and twin fin boards

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Glass Flex Carver

R 820.00

Shipping calculated at checkout.

Designed for powerful, drawn-out turns with added hold. Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face. Ideal for power surfers who like to push hard against their fins and draw out their turns.

Product Details:

Ideal Conditions: Open face, down-the-line waves, particularly good in point and reef breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for boards with a deep concave and moderate-to-extreme rocker
Carver: Find Power. Powerful, drawn-out turns with added hold

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

RYD Land & Sea

RYD Twin Good Good Vibes Honeycomb Twin Keel 2Tab

R 1,999.00

Shipping calculated at checkout.

Made to suit the traditional fish/twin fin shapes, this fuller keel shaped fin with an upright (pivot) profile and large base, will give you all the forward momentum you need when coupled with your favourite fish. The small cutaway shaped in the bottom rear of the fin also adds more release through your turns. This is a traditional shaped twin fin, for your traditionally shaped fish.

*Our Layback Range is made of a full honeycomb construction. So what is this honeycomb we keep talking about? It's a hexagonal shaped foam that sits inside the core of the fin, which is then glassed in with resin. Because less resin is used, honeycomb fins are generally lighter, and we already know they offer more flex. And more flex equals more whip. And more whip equals more stoke!

Height: 5.07 Inch
Base: 6.65 Inch
Area: 25.53 Inch
Foil: Flat

RYD Twin Good Good Vibes Honeycomb Twin Keel 1Tab

RYD Land & Sea

RYD Twin Good Good Vibes Honeycomb Twin Keel 1Tab

R 1,999.00

Shipping calculated at checkout.

Made to suit the traditional fish/twin fin shapes, this fuller keel shaped fin with an upright (pivot) profile and large base, will give you all the forward momentum you need when coupled with your favourite fish. The small cutaway shaped in the bottom rear of the fin also adds more release through your turns. This is a traditional shaped twin fin, for your traditionally shaped fish.

*Our Layback Range is made of a full honeycomb construction. So what is this honeycomb we keep talking about? It's a hexagonal shaped foam that sits inside the core of the fin, which is then glassed in with resin. Because less resin is used, honeycomb fins are generally lighter, and we already know they offer more flex. And more flex equals more whip. And more whip equals more stoke!

Height: 5.07 Inch
Base: 6.65 Inch
Area: 25.53 Inch
Foil: Flat

RYD Land & Sea

RYD Foundry Honeycomb Thruster 2Tab

R 1,599.00

Shipping calculated at checkout.

Two Tab (FCS)

RYD Foundry Art Thruster 1Tab Coral/Navy

RYD Land & Sea

RYD Foundry Art Thruster 1Tab Coral/Navy

R 1,599.00

Shipping calculated at checkout.

Fiberglass
Foundry Large Raked

Outside/Inside
Height: 4.49 Inch
Base: 4.63 Inch
Area: 15.98 Inch
Foil: Flat
Centre
Height: 3.85 Inch
Base: 3.82 Inch
Area: 11.07 Inch
Foil: 50/50

RYD Land & Sea

RYD Foundry Carbon Flex Thruster 2Tab

R 1,999.00

Shipping calculated at checkout.

Carbon Flex
Foundry Large Raked

Our Alt Range uses composite materials. That's just a fancy term for saying we use two different types of material in the fin construction that delivers, what we call a Carbon Flex combination. You'll find carbon at the base of the fin (the stiffness at the base helps with drive and control) and a honeycomb fabrication for the rest of the fin (giving the fin the ability to flex above the stiff base). This is a great all-round construction option offering drive and whip at the right times.

Carbon Base
Fiberglass Design
Honeycomb Core
Double Flex Pattern

Outside/Inside
Height: 4.49 Inch
Base: 4.63 Inch
Area: 15.98 Inch
Foil: Flat
Centre
Height: 4.49 Inch
Base: 4.63 Inch
Area: 15.32 Inch
Foil: 50/50

FCS

FCS CI Performance Core Black Flame

R 2,500.00

Shipping calculated at checkout.

The FCSII CI PC Thruster Set from the Shapers Series based on the Reactor template.

This Al Merrick Channel Islands colab fin is designed maximum speed and tight turns. This fin works in a wide variety of conditions but comes to life in punchy waves where you need quick acceleration and speed out of your bottom turn.

The Performance Core (PC) construction is made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions. The FCS II CI PC fins are another step forward in using fin tech to maximise your boards performance. This excellent fin is best suited to more performance shapes with more rocker and deeper concaves. The CI PC fin set-up is going to be your go to choice.

Product Details:

Template: Performer Performance Core (PC)
Material: Performance Core (PC) material is light and can be used in a variety of different conditions. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn
Ideal Conditions: Hollow steep waves, punchy beach breaks
Board Types: Designed to fit the FCS II Fin System. Performance boards with deep concaves and moderate-to-extreme rocker
Reactor: Find Speed. Speed, tight turns & snaps

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Scarfini

Scarfini SCA Thruster 2 Tab

R 200.00

Shipping calculated at checkout.

Product Details:

Size: Sca5 Medium (60-80kg)
Size: Sca7 Medium (80kg)
Base: 2 Tab
Thruster (3 fins)
Perfect for beginners

Scarfini

Scarfini Aircore Fibreglass 6" Longboard Blue (LG6)

R 1,149.00

Shipping calculated at checkout.

Moulded glass-fibre polymer construction delivering hi-performance. The high content of glass makes these fins stiff and responsive producing a whip flex effect. The injection molding process ensures geometric foil accuracy and provides a trusty and consistent feel in a wide range of surf conditions.

Suitable for any longboard.

Product Details:

Size: Suits all
Template: Longboard
Material: Aircore Fibreglass
Dimensions: 6"
Base: 1 Tab

Scarfini

Scarfini 7.2" Longboard Air Fin Blue (LB7.2)

R 1,149.00

Shipping calculated at checkout.

The lightest fins available that float on water!

These fins feature an ecofriendly core material which is made of 10% recyclable compound and 90% is just simply air.

The carbon fibre pattern design at the trailing edge of the fins produces a controlled and reliable flex memory that feels smoother through turns.

Product Details:

Size: Suits all
Template: Longboard
Material: Aircore Fibreglass
Dimensions: 7.2"
Base: 1 Tab

Scarfini

Scarfini Twin Hex 2 Fin XL 1 Tab (FINS-TWI-2F-1)

R 1,000.00

Shipping calculated at checkout.

Product Details:

Size: Suits all
Template: Specialty
Base: 1 Tab
Sold as a set (2 fins)

Scarfini

Scarfini Stabilizer Hex XL 1 Tab (FINS-STB-1F)

R 329.00

Shipping calculated at checkout.

Product Details:

Size: Suits all
Template: Specialty
Base: 1 Tab
Sold as single fin

Scarfini

Scarfini FX Eco Fibreglass 1 Tab Keel (FINS-KEE-2F) Smoke Swirl

R 1,399.00

Shipping calculated at checkout.

High speed down the line with added quick and smooth turning capabilities.

Product Details:

Size: Suits all
Template: Specialty
Material: Eco
Dimensions: B: 170mm/6.7" H: 127mm/5"
Base: 1 Tab

Scarfini

Scarfini E3 Equilibrium Carbon Base 2 Tab Thruster Large (E3 2TAB) Red

R 1,299.00

Shipping calculated at checkout.

These fins incorporate a hexagonal foam core material and construction that offers the traditional fibreglass fin like flex with the added advantage of weight reduction. The carbon base maintains rigidity at the base for stability and drive which converts to a progressive tip flex.

A well balanced template with a medium base and a medium tip. Ideal for any type of surfboard in any conditions.

Product Details:

Size: Large (90 kg)
Template: Equilibrium
Material: Carbon Base Hydroflex Fibreglass
Dimensions: B: 114mm/4.5" H: 117.5mm/4.63"
Base: 2 Tab
Thruster (3 fins)

Scarfini

Scarfini E3 Hex Equilibrium Carbon Base 5 Fin Thruster Medium-Large (FINS-EQU-5F)

R 1,999.00

Shipping calculated at checkout.

These fins incorporate a hexagonal foam core material and construction that offers the traditional fibreglass fin like flex with the added advantage of weight reduction. The carbon base maintains rigidity at the base for stability and drive which converts to a progressive tip flex.

A well balanced template with a medium base and a medium tip. Ideal for any type of surfboard in any conditions.

Product Details:

Size: Medium-Large (70-90 kg)
Template: Equilibrium
Material: Carbon Base Hydroflex Fibreglass
Dimensions: B: 114mm/4.5" H: 117.5mm/4.63"
Base: 2 Tab
5 Fins

Scarfini

Scarfini E3 Equilibrium Carbon Base 1 Tab Thruster Medium Large (E3 1TAB) Red

R 1,299.00

Shipping calculated at checkout.

These fins incorporate a hexagonal foam core material and construction that offers the traditional fibreglass fin like flex with the added advantage of weight reduction. The carbon base maintains rigidity at the base for stability and drive which converts to a progressive tip flex.

A well balanced template with a medium base and a medium tip. Ideal for any type of surfboard in any conditions.

Product Details:

Size: Medium Large (70-90 kg)
Template: Equilibrium
Material: Carbon Base Hydroflex Fibreglass
Dimensions: B: 114mm/4.5" H: 117.5mm/4.63"
Base: 1 Tab
Thruster (3 fins)