FCS II Mark Richards Neo Glass Eco Twin + Stabiliser

FCS

FCS II Mark Richards Neo Glass Eco Twin + Stabiliser

R 1,230.00

Shipping calculated at checkout.

MR's twin + stabiliser template, now in new Neo Glass Eco. Exceptional pivot off the top, while the centre fin adds control.

Product Details:

About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials

Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions
Setup: Mark Richard's famous twin template produces exceptional drive and speed. The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up
Ideal Conditions: Constructed with 50% glass and bio-resin, MR's Neo Glass Eco Twin +1 has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. MR's template in Neo Glass Eco exceptional pivot off the top, while the centre fin adds control and is suitable for all conditions
Board Types: Designed to fit the FCS II Fin System. Recommended for all board types including fish, funboard and twin fin boards

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Performer Performance Core

R 2,170.00

Shipping calculated at checkout.

Balance of speed, flow and response. Suitable for all conditions.

Product Details:

Template: Performance Core (PC)
Material: Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions. Designed for a balance of speed, flow & response. Well proportioned template with Inside Foil Technology (IFT). Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns
Ideal Conditions: A wide range of conditions from beach breaks to point breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for all board types
Performer: Find Balance. A balance of speed, flow & response

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Glass Flex Carver

R 800.00

Shipping calculated at checkout.

Designed for powerful, drawn-out turns with added hold. Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face. Ideal for power surfers who like to push hard against their fins and draw out their turns.

Product Details:

Ideal Conditions: Open face, down-the-line waves, particularly good in point and reef breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for boards with a deep concave and moderate-to-extreme rocker
Carver: Find Power. Powerful, drawn-out turns with added hold

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS II Mark Richards Peformance Core Thruster

FCS

FCS II Mark Richards Peformance Core Thruster

R 2,000.00

Shipping calculated at checkout.

MR's twin + stabiliser template. Exceptional pivot off the top, while centre fin adds control.

Product Details:

Materials:
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions
Setup: Mark Richard's famous twin template produces exceptional drive and speed. The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up
Ideal Conditions: Constructed with 50% glass and bio-resin, MR's Neo Glass Eco Twin +1 has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. MR's template in Neo Glass Eco exceptional pivot off the top, while the centre fin adds control and is suitable for all conditions
Board Types: Designed to fit the FCS II Fin System. Recommended for all board types including fish, funboard and twin fin boards

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Carver Performance Core

R 2,300.00

Shipping calculated at checkout.

Powerful, drawn-out turns. Excels on open face waves. Designed for powerful, drawn-out turns with added hold. Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face. Ideal for power surfers who like to push hard against their fins and draw out their turns.

Product Details:

Template: Carver Performance Core (PC)
Material: Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions
Ideal Conditions: Open face, down-the-line waves, particularly good in point and reef breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for boards with deep concaves and moderate-to-extreme rocker
Carver: Find Power. Powerful, drawn-out turns with added hold

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS Regular Classic Leash 6'

R 499.00

Shipping calculated at checkout.

FCS have reimagined a product that has virtually remained unchanged for 2 decades. The surfer benefits with a product that reduces tangling and drag, and ultimately gives the wearer more freedom to perform at his or her best.

Product Details:

Cord Thickness: 7mm.
Wave Size: 2 - 8 ft.
Smooth rotating nylon cuff and rail saver swivel assembly.
Stainless steel and brass swivels.
Engineered polyurethane cord
Neoprene ankle strap

FCS

FCS Classic Comp Leash 6'

R 490.00

Shipping calculated at checkout.

FCS have reimagined a product that has virtually remained unchanged for 2 decades. The surfer benefits with a product that reduces tangling and drag, and ultimately gives the wearer more freedom to perform at his or her best.

Product Details:

Cord Thickness: 5.5mm.
Wave Size: 0 - 4 ft.
Smooth rotating nylon cuff and rail saver swivel assembly.
Stainless steel and brass swivels.
Engineered polyurethane cord
Neoprene ankle strap

FCS II Shaper Series Sharpeye Performance Core

FCS

FCS II Shaper Series Sharpeye Performance Core

R 2,300.00

Shipping calculated at checkout.

Marcio Zouvi's 'Sharp Eye' shaper fin. A versatile all round Performance Core fin with a larger base, ideal for controlled power turns in critical sections. Beginning his shaping career in the 80's, Marcio Zouvi and his crew have designed board templates for the highest performing surfers on tour. With a large focus on premium shortboard designs and progressive surfing in mind, Sharp Eye surfboards have become the board of choice for CT surfers like Filipe Toledo, Barron Mamiya and Sally Fitz.

Product Details:

Template: Performance Core (PC)
Material: Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions. Designed for a balance of speed, flow & response. Well proportioned template with Inside Foil Technology (IFT). Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns
Ideal Conditions: A wide range of conditions, particularly good in critical overhead waves. Performs well in punchy conditions
Board Types: Designed to fit the FCS II Fin System. Recommended for all board types
Performer: Find Balance. A balance of speed, flow & response
Developed in conjunction with Marcio Zouvi from Sharp Eye Surfboards
High Performance fin with a larger base, maintains lots of drive with plenty of release off the lip
Controlled high speed turns in punchy conditions
Suited to performance and hybrid shortboards

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Reactor Performance Core Eco

R 1,500.00

Shipping calculated at checkout.

Speed & tight turns. Ideal for beach breaks. Designed for speed and tight turns, with added tail release. Upright template allows for tighter, more acute directional changes. Smaller centre fin for increased pivot and tail release. Ideal for surfers who like to perform fast, progressive turns.

Product Details:

Template: Performance Core (PC)
Material: Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions
Ideal Conditions: Suitable for hollow waves, particularly good for beach breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for performance shortboards with moderate-to-low rocker
Reactor: Find Speed. Speed, tight turns & snaps

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Carver Neo Glass Eco

R 1,500.00

Shipping calculated at checkout.

The Carver template in Neo Glass Eco offers powerful, drawn-out turns and excels on open face waves. Constructed with 50% glass and bio-resin, the Neo Glass Eco Carver has a low impact construction with high impact performance that’s recommended for lighter more agile surfers.

Product Details:

Template: Accelerator Neo Glass
Material: Neo Glass fins are precision moulded using long strand fibreglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fibreglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions
Ideal Conditions: Open face, down-the-line waves, particularly good in point and reef breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for boards with deep concaves and moderate-to-extreme rocker
Carver: Find Power. Powerful, drawn-out turns with added hold
Designed for powerful, drawn-out turns with added hold
Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face
Ideal for power surfers who like to push hard against their fins and draw out their turns

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Reactor Performance Core

R 2,300.00

Shipping calculated at checkout.

Speed & tight turns. Ideal for beach breaks. Designed for speed and tight turns, with added tail release. Upright template allows for tighter, more acute directional changes. Smaller centre fin for increased pivot and tail release. Ideal for surfers who like to perform fast, progressive turns.

Product Details:

Template: Performance Core (PC)
Material: Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions
Ideal Conditions: Suitable for hollow waves, particularly good for beach breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for performance shortboards with moderate-to-low rocker
Reactor: Find Speed. Speed, tight turns & snaps

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Mick Fanning Twin

R 2,550.00

Shipping calculated at checkout.

Mick Fanning's specialty twin takes aspects of the revolutionary H4 and Mick's wildly popular signature thruster to combine into a highly tuned twin form, built for speed and control.

Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control
Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
Foil: With a focus on speed, the contemporary foils on the side fins significantly reduces drag and introduces flex in the upper half of the fin precisely where it’s needed
Surf fast, push hard, and go wild with this new 2+1 set up

Product Details:

Material: Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin. AirCore technology reduces the amount of fibreglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
Ideal Conditions: Open face, down-the-line waves, particularly good in point and reef breaks
Board Types: Designed to fit the FCS II Fin System. Recommended for all board types including fish, funboard and twin fin boards

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II Kolohe Andino Tri Fins

R 2,400.00

Shipping calculated at checkout.

Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release. Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.

Product Details:

Size: Large (75kg-90kg)
Template: Performer Performance Core (PC)
Material: Performance Core (PC) material is light and can be used in a variety of different conditions. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn
Ideal Conditions: A wide range of conditions, particularly good in critical overhead waves
Board Types: Designed to fit the FCS II Fin System. Recommended for performance shortboards with moderate-to-extreme rocker
Accelerator: Find Control. Speed, flow and response with added control

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II H4 Filipe Toledo

R 3,100.00

Shipping calculated at checkout.

The H4 looks and surfs different to any other fin. Precision Swiss engineering matched with a highly evolved template provides an unprecedented level of control and predictability at high speeds. Almost intuitive in the way the H4 performs, when you initiate a turn, the fins will work for you by supplying speed when you need it and then releasing at the ideal transition point. While the science behind the template, the materials and the foils are highly complex, every component of this fin has been engineered to create a simple synergy between the fin and the surfboard, the rider and the wave.

Product Details:

Template: Radically different side & centre fin templates create a powerful fin set with ultimate speed & drive
SIDE FIN PROFILE: Lower section produces maximum acceleration, while hatchet like tip creates stability & control
CENTRE FIN PROFILE: Highly raked elliptical outline reduces drag, and offers feeling of predictability when releasing through turns
FIN FOILS TEMPLATE: Thicker base with tapered tip optimises flex & regulates the release of energy during rail to rial transitions

Material: NEW CONSTRUCTION PRECISION SWISS ENGINEERED: Creates perfect synergy between fin geometry & HI-FI materials, giving smooth & predictable feel
HIGH DENSITY UNI-DIRECTIONAL CARBON FIBRE: Light & super strong with custom orientation to transfer more of your energy into speed than any other fin
DYNAMIC TRAILING EDGE: Internal composite morphs under extreme load, enabling the fins to be pushed harder without sliding out
INNOVATIVE PRODUCTION: Highly specialised robotic automation combined with camera assisted quality control, ensures absolute accuracy
Ideal Conditions: A wide range of conditions, particularly good in critical overhead waves
Board Types: Designed to fit the FCS II Fin System. Recommended for performance shortboards with moderate-to-low rocker
Accelerator: Find Control. Speed, flow and response with added control

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCSII Julian Wilson Performance Core Thruster

FCS

FCSII Julian Wilson Performance Core Thruster

R 2,550.00

Shipping calculated at checkout.

Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response. Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns. Updated in PC construction featuring our ultralight AirCore.

Product Details:

Size: Medium (60-80kg) Large (80+ kg)
Template: Performer Performance Core (PC)
Material: Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin. AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
Ideal Conditions: Open face, down-the-line waves, particularly good in point and reef breaks
Board Types: Designed to fit the FCS II Fin System. Performance boards with deep concaves and moderate-to-extreme rocker
Carver: Find Power. Powerful, drawn-out turns with added hold

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS CI Shapers Performance Core

R 2,200.00

Shipping calculated at checkout.

A collaboration with Channel Islands Surfboards, the CI Upright is designed for speed and tight turns. A template that comes to life in punchy hollow waves, but can also suit conditions where you need the start up speed to get going.

Product Details:

Template: Performer Performance Core (PC)
Material: Performance Core (PC) material is light and can be used in a variety of different conditions. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn
Ideal Conditions: Hollow steep waves, punchy beach breaks
Board Types: Designed to fit the FCS II Fin System. Performance boards with deep concaves and moderate-to-extreme rocker
Reactor: Find Speed. Speed, tight turns & snaps

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS

FCS II AM Al Merrick Performance Core

R 2,200.00

Shipping calculated at checkout.

Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive. Al Merrick's template is designed for radical, progressive surfing. The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.

Product Details:

Template: Performer Performance Core (PC)
Material: Performance Core (PC) material is light and can be used in a variety of different conditions. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn
Ideal Conditions: Hollow steep waves, punchy beach breaks.
Board Types: Designed to fit the FCS II Fin System. Performance boards with deep concaves and moderate-to-extreme rocker
Carver: Find Power. Powerful, drawn-out turns with added hold

Fin Sizes:

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)