Home page

The 4-pack Blind Reaper Helmet wheels are suitable for skateboards. The small 52 mm wheels are your street setup for pop and good balance. Whereas the medium-sized 53 mm wheels will serve you as an all-arounder for street, park and small ramps.

With the hard durometer of 99A, these Blind wheels are great for performing tricks and smooth slides and grinds.

Please Note: This product will incur additional shipping costs above the flat rate of R300 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

 Product Details:

• 7-ply Maple Deck
• Width: 8.0"
• Double Kick Tail

Please Note: This product will incur additional shipping costs above the flat rate of R300 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

 Product Details:

• 8.25"
  

Product Details:

• Clean your bearings with ease thanks to its removable nylon ball cages
• Keep dust and dirt out in most terrains thanks to its protective rubber shields
• Lubricated by hand with Killer Speed Race Oil for maximum speed
• 8 bearings

• Cord Thickness: 7mm.
• Wave Size: 2 - 8 ft.
• Smooth rotating nylon cuff and rail saver swivel assembly.
• Stainless steel and brass swivels.
• Engineered polyurethane cord
• Neoprene ankle strap

• Cord Thickness: 5.5mm.
• Wave Size: 0 - 4 ft.
• Smooth rotating nylon cuff and rail saver swivel assembly.
• Stainless steel and brass swivels.
• Engineered polyurethane cord
• Neoprene ankle strap

The Sheldon Simkus Pro Model Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. The Sheldon Simkus Pro Model boasts a 28mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Details:

• Three Piece
  
• Width: 300mm
  
• Height: 305mm
  
• 28mm Power Kick
  
• 7 x 130mm Pro Arch
  
• Diamond Trax Groove
  
• Close Cell Water Resistant EVA

The Matt Banting Pro Model Tailpad is a performance 3 piece tailpad template that is perfect for Performance Shortboards, Longboards, Twins, and Funboards. The Matt Banting Pro Model boasts a huge 33mm Power Kick which is a great for doing airs and modern performance surfing. Shapers Tailpads and Deckgrips are lightweight, closed cell water resistant, rash resistant, offer premium board adhesion, and most importantly, provide sticky long lasting traction for your surfboard.

Product Details:

• Three Piece
  
• Width: 305mm
  
• Height: 325mm
  
• 33mm Power Kick
  
• 8 x 130mm Tapered Pro Arch
  
• Grid Lock+ Groove
  
• Close Cell Water Resistant EVA

AM Fins are legendary! Developed by Al Merrick, Shaun Tomson and Tom Curren on the long walls of Rincon, AM’s have stood the test of time and remain arguably the most popular fin templates in the world. All of Shapers team riders have AM’s in their fin quiver for the simple fact that they perform at the highest level. AM’s are famous for exceptional speed, drive and release off the top.

The raked side fins deliver drive and draw out rail carves whilst the smaller centre fin reduces drag and frees up the tail. The AM’s are placed in the Carve Fin Class however fall into the all time, must have category! CORELITE is Shapers traditional light-weight construction that provides a balanced flex pattern that responds to all levels of surfing.

Product Details:

Compatible with Futures Fin Systems

Large: 75-95kgs

Hardcore protection.

Put on 30 minutes before you are exposed to the sun. Avoid contact to the eyes.  Apply the sunscreen product before exposure. Re-apply frequently to maintain protection, especially after perspiring, swimming or towelling. Only for external usage.

Product Details:

• 200ml
• SPF 50
• UVB- 30 times the natural skin protection against sunburns.
  UVA- optimal protection against skin aging caused by the sun.
  Skin friendly and dermatologically tested
• Ingredients: Water, Octocrylene, Butyl Methoxydibenzoylmethane, Ethylhexyl Methoxycinnamate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, C12-15 Alkyl Benzoate, Caprylic/Capric Triglyceride, Potassium Cetyl Phosphate, Glycerin, Hydrogenated Dimer Dilinoleyl/Dimethylcarbonate Dopolymer, Ethylhexyl Triazone, Cyclopentasiloxane, Glyceryl Stearate, Isohexadecane, Sorbitan Stearate, Phenoxyethanol, PEG-100 Stearate, Carbomer, Tocopheryl Acetate, Disodium EDTA, Sodium Hydroxide, Ethylhexylglycerin

Please Note: This product will incur additional shipping costs above the flat rate of R300 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

A Pro carver skateboard for surf training or just cruising & carving for fun. The Charger-X Pro 31” Surf Skateboard is a full set up with deck, trucks and wheels. This model comes with Black & White Deck, White Wheels & Black Trucks.

Product Details:

• 6.5” Nylon Carbon Alloy Surf Trucks with 83A Bushings for easy carving & pumping
• 70mm x 52mm 83A HRS High Rebound Wheels for easy drifting & carving
• ABEC 9 Ball Bearings with built-in spacers for smooth riding
• 14” wheelbase for optimal carving
• Single kick, super grip, concave deck with light flex for comfortable cruising & effective carving
• Unique Bullet Hooks surface deck grip to keep you locked in for tight carves & pumping
• Deck made from maple wood
• Handle hole for easy carrying when not carving it up

Please Note: This product will incur additional shipping costs above the flat rate of R300 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

Best for street cruising and pumping street carving.

Product Details:

• Canadian Maple Deck
• Patented Charger-x Handel Design
  
• 6.5 Aluminum Alloys Surf-Skate
  
• Patented Truck Design
  
• Provide Explosive extra angle for easy pumping
  
• Patented cool futuristic design with easy to carry handle
  
• Single kick super grip concave deck with light flex makes it easy for carving and cruising
  
• Abec 9 bearings with a built-in spacer for a smooth and fast ride
  
• Sand Grip High-Quality deck, providing a super lock while pumping and carving
  
• 85A HRS bushing
  
• Riser
  
• Abec9 built-in spacer
  
• High rebound PU wheels A83 hardness
  
• Drifting and carving

• Padded rack covers for all-round board protection
• Pads fit most CARS, SUV'S, TRUCKS, and Vans
• Quick and easy to put on and take off
• Strong velcro application. No tools needed.
• Re-usable storage bag included.
• Double racks fit up to 2 - 6 shortboards or 2 - 4 longboards