Performance

The DRIVER3.0 is the culmination of the last three years of subtle, consistent fine tuning of the Driver2.0, with our elite level team riders. Since the launch of the Driver2.0, in 2019, our team has consistently pushed us to continue evolving, always strive to have an edge, competing against the worlds best surfers. We are motivated by making strides to come out on top. It represents the methodical advancements and evolution of the Driver2.0,  the point where it is no longer even the same model.  Publicly leaked and unveiled (as a squash tail) in the 2022 StabInTheDark, with Jack Robinson, where we just missed a win, ending with a very close runner up. Further refinement and adaptation from the SITD board, though 2022, cemented this design as some thing special. Virtually every top tier surfer we work with was claiming this version as the best board in their quiver. Highlighted by Griffin Colapinto and his two WCT victories of the season, in Portugal and El Salvador. The DRIVER3.0 Rnd is essentially replicated directly from Griffins magic board, during that El Salvador event.  The response and accolades from every gifted surfer in our team (from vets like Kolohe Andino, Yago Dora and Ian Crane to young guns like Eli Hanniman, Crosby Cola and Cole Housmand) has been so resoundingly positive, that we felt it was time to go public and offer this design officially, for late 2022 and beyond.

Simply stated, the DRIVER3.0 features slightly more tail rocker and a deeper double to single concave, through the rear half, than its predecessor, the Driver2.0.  The deck line in the tail is scooped out, with lower, boxy rails, to follow the bottom curve and slice seamlessly into the water. More concave means more lift and more rail line rocker. More lift means more speed. More rail rocker, means more curve, for searing, tight radius turns.  We narrowed the hip, between the feet, adding grip and stability to the outline. The round tail is fairly wide and forgiving under the rear foot, but the last few inches pull in enough to add confidence and hold in hard pushing, Pro level, pocket surfing.

To balance these design elements (added tail rocker, narrower hip, scooped out deck and hyper rail rocker) we have carried a bit more width in the forward outline and volume in the forward foil. This forward volume adds glide and a more responsive drive, off the front foot.  The DRIVER3.0 runs thicker, along the stringer line (for paddle power and drive) but has a higher angle “Vee” deck, which removes volume and ends in a moderate, but round and forgiving, rail.

Overall, the dims and volumes are noticeably a bit more generous. Like everything else in this boards design evolution, it is a reaction to (and response from) our top tier athletes requests. Griffin is riding 5’11 x 28.50 liters. Yago 5’11 and 6’0 x 29.50 liters. Kolohe and Crosby are somewhere in between, riding similar lengths, but at 29.00 liters of volume.

The DRIVER3.0 Rnd is the status quo of high level, Pro-formance surfing, today. Developed with direction, testing and feedback from the many of the best surfers in the USA and around the world, it has been proven on the worlds biggest stage, yet is designed with enough foam and built in speed to be a viable tool in any adepts surfers quiver.

DRIVER3.0…The Ultimate Driver machine.

Dimensions in store:

5.7ft X 18.63" X 2.40

Futures thruster

Round Tail

Clear with red rails

ORDER A CUSTOM THROUGH US!

The DRIVER3.0 is the culmination of the last three years of subtle, consistent fine tuning of the Driver2.0, with our elite level team riders. Since the launch of the Driver2.0, in 2019, our team has consistently pushed us to continue evolving, always strive to have an edge, competing against the worlds best surfers. We are motivated by making strides to come out on top. It represents the methodical advancements and evolution of the Driver2.0,  the point where it is no longer even the same model.  Publicly leaked and unveiled (as a squash tail) in the 2022 StabInTheDark, with Jack Robinson, where we just missed a win, ending with a very close runner up. Further refinement and adaptation from the SITD board, though 2022, cemented this design as some thing special. Virtually every top tier surfer we work with was claiming this version as the best board in their quiver. Highlighted by Griffin Colapinto and his two WCT victories of the season, in Portugal and El Salvador. The DRIVER3.0 Rnd is essentially replicated directly from Griffins magic board, during that El Salvador event.  The response and accolades from every gifted surfer in our team (from vets like Kolohe Andino, Yago Dora and Ian Crane to young guns like Eli Hanniman, Crosby Cola and Cole Housmand) has been so resoundingly positive, that we felt it was time to go public and offer this design officially, for late 2022 and beyond.

Simply stated, the DRIVER3.0 features slightly more tail rocker and a deeper double to single concave, through the rear half, than its predecessor, the Driver2.0.  The deck line in the tail is scooped out, with lower, boxy rails, to follow the bottom curve and slice seamlessly into the water. More concave means more lift and more rail line rocker. More lift means more speed. More rail rocker, means more curve, for searing, tight radius turns.  We narrowed the hip, between the feet, adding grip and stability to the outline. The round tail is fairly wide and forgiving under the rear foot, but the last few inches pull in enough to add confidence and hold in hard pushing, Pro level, pocket surfing.

To balance these design elements (added tail rocker, narrower hip, scooped out deck and hyper rail rocker) we have carried a bit more width in the forward outline and volume in the forward foil. This forward volume adds glide and a more responsive drive, off the front foot.  The DRIVER3.0 runs thicker, along the stringer line (for paddle power and drive) but has a higher angle “Vee” deck, which removes volume and ends in a moderate, but round and forgiving, rail.

Overall, the dims and volumes are noticeably a bit more generous. Like everything else in this boards design evolution, it is a reaction to (and response from) our top tier athletes requests. Griffin is riding 5’11 x 28.50 liters. Yago 5’11 and 6’0 x 29.50 liters. Kolohe and Crosby are somewhere in between, riding similar lengths, but at 29.00 liters of volume.

The DRIVER3.0 Rnd is the status quo of high level, Pro-formance surfing, today. Developed with direction, testing and feedback from the many of the best surfers in the USA and around the world, it has been proven on the worlds biggest stage, yet is designed with enough foam and built in speed to be a viable tool in any adepts surfers quiver.

DRIVER3.0…The Ultimate Driver machine.

Dimensions in store:

5.7ft X 18 3/8" X 2.25

Futures thruster

Squash Tail

Clear with red rails

ORDER A CUSTOM THROUGH US!

THIS BOARD

The IF-15 model is a high performance model developed for the WCT surfer Italo Ferreira.

Shaped with a well-balanced outline that foils into a fuller wider nose creating excellent stability upon returning from extreme maneuvers. We keep a sharp edge around the curve of the tail, which allows maximum control through out any type of maneuver. This boards bottom come standard with a slight single concave. Medium rocker. Ridden best with a squash tail but also works very well with a round tail or swallow tail to accommodate waves from anywhere in the world. We can put together this board in many different sizes to accommodate any customer. The board is much more progressive with actually more volume than your normal idea of what a WCT performance shape would be. Italo is always coming out of his maneuvers with high speed through landings while rotating out because he does not waste time sinking in the middle of  his landings so he is always keeping the speed and still has all the control he could possibly want. These newer performance style boards that the guys are starting to ride translate into a very user friendly board for the standard user where it used to be the other way around. The Italo model has the right amount of volume to get you into those 2-3 extra waves each session that we always seem to miss without sacrificing the performance.

• Model: Timmy Patterson IF-15
• Type: Performance
• Code: TP004
• Shaper: Timmy Patterson
• Length: 6.2ft
• Width: 19.25
• Thickness: 2.5
• Litres: 32.05L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Tail Shape: Round Tail
• Fin Plugs: Futures Thruster
• Recommended Rider: Experienced

THIS BOARD

The IF-15 model is a high performance model developed for the WCT surfer Italo Ferreira.

Shaped with a well-balanced outline that foils into a fuller wider nose creating excellent stability upon returning from extreme maneuvers. We keep a sharp edge around the curve of the tail, which allows maximum control through out any type of maneuver. This boards bottom come standard with a slight single concave. Medium rocker. Ridden best with a squash tail but also works very well with a round tail or swallow tail to accommodate waves from anywhere in the world. We can put together this board in many different sizes to accommodate any customer. The board is much more progressive with actually more volume than your normal idea of what a WCT performance shape would be. Italo is always coming out of his maneuvers with high speed through landings while rotating out because he does not waste time sinking in the middle of  his landings so he is always keeping the speed and still has all the control he could possibly want. These newer performance style boards that the guys are starting to ride translate into a very user friendly board for the standard user where it used to be the other way around. The Italo model has the right amount of volume to get you into those 2-3 extra waves each session that we always seem to miss without sacrificing the performance.

• Model: Timmy Patterson IF-15
• Type: Performance
• Code: TP002
• Shaper: Timmy Patterson
• Length: 5.11ft
• Width: 18.80
• Thickness: 2.33
• Litres: 28.18L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Tail Shape: Round Tail
• Fin Plugs: Futures Thruster
• Recommended Rider: Experienced

THIS BOARD

The IF-15 model is a high performance model developed for the WCT surfer Italo Ferreira.

Shaped with a well-balanced outline that foils into a fuller wider nose creating excellent stability upon returning from extreme maneuvers. We keep a sharp edge around the curve of the tail, which allows maximum control through out any type of maneuver. This boards bottom come standard with a slight single concave. Medium rocker. Ridden best with a squash tail but also works very well with a round tail or swallow tail to accommodate waves from anywhere in the world. We can put together this board in many different sizes to accommodate any customer. The board is much more progressive with actually more volume than your normal idea of what a WCT performance shape would be. Italo is always coming out of his maneuvers with high speed through landings while rotating out because he does not waste time sinking in the middle of  his landings so he is always keeping the speed and still has all the control he could possibly want. These newer performance style boards that the guys are starting to ride translate into a very user friendly board for the standard user where it used to be the other way around. The Italo model has the right amount of volume to get you into those 2-3 extra waves each session that we always seem to miss without sacrificing the performance.

• Model: Timmy Patterson IF-15
• Type: Performance
• Code: TP001
• Shaper: Timmy Patterson
• Length: 5.10ft
• Width: 18.70
• Thickness: 2.30
• Litres: 27.04L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Tail Shape: Kelly Tail
• Fin Plugs: Futures Thruster
• Recommended Rider: Experienced

THE HISTORY OF HUTCHISON HANDCRAFTED SURFBOARDS 

Hutchison Handcrafted Surfboards is a roots-up surfboard shaping company, living large on the North Coast of Kwa-Zulu Natal, South Africa. Johno Hutchison AKA “HUTCH”, has been making quality handcrafted surfboards for the past 30 years and piles his trade, daily in his humble home based shaping bay in sub-tropical Ballito, specializing in custom hand-shaped surfboards to suit each individual surfer’s needs. Using only the finest materials, each surfboard is shaped, designed and custom built to your exact specifications, with no shortcuts taken. These boards are inspired by the past, present and future of board design. Johno enjoys making boards reminiscent of days past and keenly keeps an idea of what’s happening in designs of the present. Travelling abroad and locally, being involved in contests and surfing different spots helps keep his shapes fresh.

THIS BOARD

The high energy youth model. These boards come with XXX rating, made and designed for accomplished surfers who are looking for unreal small wave performance. Generally, concaves are accentuated, low volume throughout and super light glassing make these challenging boards to ride and push performance levels to the max. Be warned, if you tame the beast you will never go back to anything else. Whippa-Snappa’s are generally under 6.2ft.

• Model: Surf Pirate
• Code: HHB3377
• Shaper: Johno Hutchison
• Length: 5.8ft
• Width: 17 1/2
• Thickness: 2 1/4
• Litres: 23.8L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Tail Shape: POD
• Fin Plugs: Thruster Futures 
• Recommended Rider: Beginner - Experienced
  

THE HISTORY OF HUTCHISON HANDCRAFTED SURFBOARDS 

Hutchison Handcrafted Surfboards is a roots-up surfboard shaping company, living large on the North Coast of Kwa-Zulu Natal, South Africa. Johno Hutchison AKA “HUTCH”, has been making quality handcrafted surfboards for the past 30 years and piles his trade, daily in his humble home based shaping bay in sub-tropical Ballito, specializing in custom hand-shaped surfboards to suit each individual surfer’s needs. Using only the finest materials, each surfboard is shaped, designed and custom built to your exact specifications, with no shortcuts taken. These boards are inspired by the past, present and future of board design. Johno enjoys making boards reminiscent of days past and keenly keeps an idea of what’s happening in designs of the present. Travelling abroad and locally, being involved in contests and surfing different spots helps keep his shapes fresh.

THIS BOARD

The high energy youth model. These boards come with XXX rating, made and designed for accomplished surfers who are looking for unreal small wave performance. Generally, concaves are accentuated, low volume throughout and super light glassing make these challenging boards to ride and push performance levels to the max. Be warned, if you tame the beast you will never go back to anything else. Whippa-Snappa’s are generally under 6.2ft.

• Model: Surf Pirate
• Code: HHB3376
• Shaper: Johno Hutchison
• Length: 5.6ft
• Width: 18 1/2
• Thickness: 2 1/4
• Litres: 25.1L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Tail Shape: POD
• Fin Plugs: Thruster Futures 
• Recommended Rider: Beginner - Experienced
  

THE HISTORY OF HUTCHISON HANDCRAFTED SURFBOARDS 

Hutchison Handcrafted Surfboards is a roots-up surfboard shaping company, living large on the North Coast of Kwa-Zulu Natal, South Africa. Johno Hutchison AKA “HUTCH”, has been making quality handcrafted surfboards for the past 30 years and piles his trade, daily in his humble home based shaping bay in sub-tropical Ballito, specializing in custom hand-shaped surfboards to suit each individual surfer’s needs. Using only the finest materials, each surfboard is shaped, designed and custom built to your exact specifications, with no shortcuts taken. These boards are inspired by the past, present and future of board design. Johno enjoys making boards reminiscent of days past and keenly keeps an idea of what’s happening in designs of the present. Travelling abroad and locally, being involved in contests and surfing different spots helps keep his shapes fresh.

THIS BOARD

The high energy youth model. These boards come with XXX rating, made and designed for accomplished surfers who are looking for unreal small wave performance. Generally, concaves are accentuated, low volume throughout and super light glassing make these challenging boards to ride and push performance levels to the max. Be warned, if you tame the beast you will never go back to anything else. Whippa-Snappa’s are generally under 6.2ft.

• Model: Surf Pirate
• Code: HHB3347
• Shaper: Johno Hutchison
• Length: 5.6ft
• Width: 17
• Thickness: 2 1/4
• Litres: 22.3L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Tail Shape: POD
• Fin Plugs: Thruster Futures 
• Recommended Rider: Beginner - Experienced
  

Please Note: This product will incur additional shipping costs above the flat rate of R150 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

THIS BOARD

Low continuous rocker with a wide curvy outline and a generous single to double concave. Amazing control in the pocket and out on the face of the wave. Ridden 2 – 3″ shorter than your normal board.

• Model: Rockstar
• Type: Performance
• Code: HSBRS510
• Shaper: Hurricane 
• Length: 5.10ft
• Width: 19 5/8
• Thickness: 2 1/2
• Litres: 31L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Fin Plugs: Thruster Futures
• Recommended Rider: Experienced

Please Note: This product will incur additional shipping costs above the flat rate of R130 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

THIS BOARD

Low continuous rocker with a wide curvy outline and a generous single to double concave. Amazing control in the pocket and out on the face of the wave. Ridden 2 – 3″ shorter than your normal board.

• Model: Rockstar
• Type: Performance
• Code: HSBRS511
• Shaper: Hurricane 
• Length: 5.11ft
• Width: 19 3/4
• Thickness: 2 1/2
• Litres: 32L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Fin Plugs: Futures
• Recommended Rider: Experienced

Please Note: This product will incur additional shipping costs above the flat rate of R130 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

THIS BOARD

Low continuous rocker with a wide curvy outline and a generous single to double concave. Amazing control in the pocket and out on the face of the wave. Ridden 2 – 3″ shorter than your normal board.

• Model: Rockstar
• Type: Performance
• Code: HSBRS60
• Shaper: Hurricane 
• Length: 6.0ft
• Width: 20
• Thickness: 2 1/2
• Litres: 34L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Fin Plugs: Futures
• Recommended Rider: Experienced

Please Note: This product will incur additional shipping costs above the flat rate of R130 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

THIS BOARD

Low continuous rocker with a wide curvy outline and a generous single to double concave. Amazing control in the pocket and out on the face of the wave. Ridden 2 – 3″ shorter than your normal board.

• Model: Rockstar
• Type: Performance
• Code: HSBRS58
• Shaper: Hurricane 
• Length: 5.8ft
• Width: 19 1/2
• Thickness: 2 7/16
• Litres: 29L
• Top Deck Spray: Clear
• Bottom Deck Spray: Clear
• Fin Plugs: Futures
• Recommended Rider: Experienced

Please Note: This product will incur additional shipping costs above the flat rate of R150 due to weight and fragility. This charge will be quoted for and added to your final invoice before shipping.

THIS BOARD

Speed speed speed! The Vampire Twin is a really fast twin fin designed with fun in mind. Based off of the successful Hurricane Surf model, the Vampire Twin in the Ocean Storm Performance construction is sure to be a blast!

All Performance Soft Tops come with Futures Fins plugs.

Dimensions:

• 5’4’’ x 20 3/8 x 2 3/16 27lt
  
• 5’6’’ x 20 5/8 x 2 5/16 30lt
  
• 5’8’’ x 20 7/8 x 2 7/16 32.5lt